TESY Electric boiler 80L vertical/horizontal
№21552 Created: 30 July 2023
Condition:
New
Description
Tesy Water Heater 80lt Vertical or Horizontal 4kW
The Tesy water heater has a capacity of 80 litres, has a power of 4 kW and can be mounted vertically or horizontally on a wall.
It runs on electricity, where the resistance inside the water heater is heated to heat the water.
Based on the capacity in litres, it can meet all the needs of a small family of 3 people and the water is heated almost within an hour. Generally, the most common size of a water heater is 80 litres.
The water storage tank has an internal enamel coating, which results from the application of enamel (glass) to metal. This has the effect of protecting it from rust, as the water does not come into contact with the walls, thus ensuring that the water is always clean.
It is connected to the water supply and for every amount of hot water pumped for use, there is automatic replenishment with cold water.
In order to limit the heat losses that occur during the water's journey, it is advisable to install it as close as possible to the place where it will be used. If installed inside the bathroom, certain safety measures and distances should always be observed.
Finally, it should definitely be serviced every 1-2 years to avoid salt accumulations. Vertical installation provides easier maintenance, but care is needed when installing the base on the wall.
Features:
Rated Capacity: 80lt
Max. power: 4kW
Height : 74cm
Width: 44cm
Depth: 44cm
Tesy Water Heater 80lt Vertical or Horizontal 4kW
The Tesy water heater has a capacity of 80 litres, has a power of 4 kW and can be mounted vertically or horizontally on a wall.
It runs on electricity, where the resistance inside the water heater is heated to heat the water.
Based on the capacity in litres, it can meet all the needs of a small family of 3 people and the water is heated almost within an hour. Generally, the most common size of a water heater is 80 litres.
The water storage tank has an internal enamel coating, which results from the application of enamel (glass) to metal. This has the effect of protecting it from rust, as the water does not come into contact with the walls, thus ensuring that the water is always clean.
It is connected to the water supply and for every amount of hot water pumped for use, there is automatic replenishment with cold water.
In order to limit the heat losses that occur during the water's journey, it is advisable to install it as close as possible to the place where it will be used. If installed inside the bathroom, certain safety measures and distances should always be observed.
Finally, it should definitely be serviced every 1-2 years to avoid salt accumulations. Vertical installation provides easier maintenance, but care is needed when installing the base on the wall.
Features:
Rated Capacity: 80lt
Max. power: 4kW
Height : 74cm
Width: 44cm
Depth: 44cm
№21552 Created: 30 July 2023
Similar Listings
