HALLBAR waste sorting solution for METOD kitchen drawer with ventilation, 42 l
№24193 Created: 8 September 2023
Are you wondering how your waste can become new sources of energy? The HÅLLBAR range helps you separate different materials into different bins - a simple act that will give new life to waste.
Dimensions
Product dimensions
Volume: 42 l
Product details
Included products
HALLBAR bucket, 10 l (80398058)
Quantity: x1
HALLBAR bucket, 22 l (20420203)
Quantity: x1
HALLBAR bin for organic waste, 10 l (80433882)
Quantity: x1
HALLBAR stand for waste sorting bin (80422869)
Quantity: x1
Material
Bucket/ Lid/ Hinges: Polypropylene plastic (min. 20% recycled)
Handle: Reinforced polyamide plastic (min. 20% recycled)
Bucket/ Lid/ Hinges/ Ring: Polypropylene plastic (min. 20% recycled)
Handle: Reinforced polyamide plastic (min. 20% recycled)
Tube/ Middle part: Steel, Electrostatic paint
Support/ Link/ Front support: Polyamide plastic
What is good to know
Assembly and installation
Place on the MAXIMERA high drawer 60x60 cm or 60x45 cm and leave space for the piping behind the drawer.
Additional information
Designed for the dimensions of HÅLLBAR bins, except for the 3 l and 35 l bins.
Designer
Henrik Preutz
Advantages
HÅLLBAR bins are designed to meet different waste sorting needs. This tight combination is suitable if you have limited space and choose to do your recycling outside the home.
A combination with 1 bin to separate cans and smaller packages, 1 for cardboard, plastic, bottles, jars and advertising materials and 1 bin for dry and fresh organic waste.
You can also use the bins for practical storage, for example, for toilet paper or shopping bags.
Lids are included so you can hide your waste. They are removable for easy cleaning, or if you prefer to use your bins without lids.
The bin's vent holes and shape allow air to circulate to dry organic waste. This reduces unwanted odors.
A ring on the top edge of the bin conceals the waste bag and holds it in place. Removes either for easy cleaning or when not in use.
By placing the HÅLLBAR support frame for waste sorting bins in a MAXIMERA high drawer you can hide your waste sorting.
The support frame gives you quick access and a better view of the waste you separate, while keeping the bins stable. Drag it out to separate them and push it back into place when you're done.
In the kitchen, place the waste sorting as close as possible to the sink, as this is where most waste is generated and thus avoids dirtying the area.
The bin is designed with rounded corners to make it easier to clean.
The sticker can be stuck on the bin to mark what waste you throw away. Draw or write on the sticker to make it clear what you throw in which bin.
Dimensions
Product dimensions
Volume: 42 l
Product details
Included products
HALLBAR bucket, 10 l (80398058)
Quantity: x1
HALLBAR bucket, 22 l (20420203)
Quantity: x1
HALLBAR bin for organic waste, 10 l (80433882)
Quantity: x1
HALLBAR stand for waste sorting bin (80422869)
Quantity: x1
Material
Bucket/ Lid/ Hinges: Polypropylene plastic (min. 20% recycled)
Handle: Reinforced polyamide plastic (min. 20% recycled)
Bucket/ Lid/ Hinges/ Ring: Polypropylene plastic (min. 20% recycled)
Handle: Reinforced polyamide plastic (min. 20% recycled)
Tube/ Middle part: Steel, Electrostatic paint
Support/ Link/ Front support: Polyamide plastic
What is good to know
Assembly and installation
Place on the MAXIMERA high drawer 60x60 cm or 60x45 cm and leave space for the piping behind the drawer.
Additional information
Designed for the dimensions of HÅLLBAR bins, except for the 3 l and 35 l bins.
Designer
Henrik Preutz
Advantages
HÅLLBAR bins are designed to meet different waste sorting needs. This tight combination is suitable if you have limited space and choose to do your recycling outside the home.
A combination with 1 bin to separate cans and smaller packages, 1 for cardboard, plastic, bottles, jars and advertising materials and 1 bin for dry and fresh organic waste.
You can also use the bins for practical storage, for example, for toilet paper or shopping bags.
Lids are included so you can hide your waste. They are removable for easy cleaning, or if you prefer to use your bins without lids.
The bin's vent holes and shape allow air to circulate to dry organic waste. This reduces unwanted odors.
A ring on the top edge of the bin conceals the waste bag and holds it in place. Removes either for easy cleaning or when not in use.
By placing the HÅLLBAR support frame for waste sorting bins in a MAXIMERA high drawer you can hide your waste sorting.
The support frame gives you quick access and a better view of the waste you separate, while keeping the bins stable. Drag it out to separate them and push it back into place when you're done.
In the kitchen, place the waste sorting as close as possible to the sink, as this is where most waste is generated and thus avoids dirtying the area.
The bin is designed with rounded corners to make it easier to clean.
The sticker can be stuck on the bin to mark what waste you throw away. Draw or write on the sticker to make it clear what you throw in which bin.
№24193 Created: 8 September 2023
Similar Listings